Overview
This module allows you to block or pass MIDI Note messages by note number and velocity.
You can also use this module to change the channel of Note messages passed through.
Parameters
Min Note Num
Note messages with a note number less than this value are blocked.
Max Note Num
Note messages with a note number greater than this value are blocked.
Min Velocity
Note messages with a velocity less than this value are blocked. Keep in mind that
Numerology 2 uses the value range of 0.0 to 1.0 for velocity.
Max Velocity
Note messages with a velocity greater than this value are blocked. Keep in mind that
Numerology 2 uses the value range of 0.0 to 1.0 for velocity.
MIDI Ch In
If this is set to "Default" then no Note messages are blocked based on their
MIDI Channel. If it is set to a specific channel, then only Note messages on
that channel will be passed through.
MIDI Ch Out
If this is set to "Default" then Note messages will retain their MIDI Channel
setting on output. If it is set to a specific channel, all Note messages that
make it through the module will have their MIDI Channel set to this value.
Ports
