jue
11-30-2009, 11:45 AM
This are new examples of the MultiTransposeSeq posibilities.
first:
The pitch is paralleled with a S&H module and then all output of it are summed to the in of the NoteGen.
So the final pitch results allways from the sum of eight pitch informations.
So if you change only one or two of the pitches in the MonoNote it results in a complete other melody.
Suggest you use two or three different settings in the Random Jump line.....
second:
Added some GateSeqs, S&H and 8 Switches to make the transposevalues selectable by the pattern of the GateSeq 1...
You can see the pattern when you look at the C and D stages of the switches.
best
jue
first:
The pitch is paralleled with a S&H module and then all output of it are summed to the in of the NoteGen.
So the final pitch results allways from the sum of eight pitch informations.
So if you change only one or two of the pitches in the MonoNote it results in a complete other melody.
Suggest you use two or three different settings in the Random Jump line.....
second:
Added some GateSeqs, S&H and 8 Switches to make the transposevalues selectable by the pattern of the GateSeq 1...
You can see the pattern when you look at the C and D stages of the switches.
best
jue