Numerology 2.3.1 Beta 1

[jim]

A few fixes and updates. More on the way...

http://www.five12.com/Numerology-2.3.1b1.dmg

FYI: I have not yet tested the AC encoding support discussed below with a synth yet -- the algorithm is based on discussions w/ Os of ExpertSleepers and comparison with his AC Encoder plugin. If you have the correct cabling to test the AC output, I'll certainly be curious to know how it works.

Numerology 2.3.1b1 Release Notes:

- SilentWay Voice Controller : Numerology 2 now supports a built-in AC encoding option for this plugin. When you look in the module library, you will see two instances of this plugin, one for DC operation, and one for AC operation. If you chose the AC option, you will also get to select the min/max value for the output, as well as the polarity of each output pair.

- Fixed a bug related to routing CV signals to either Silent Way Voice Controller or Volta.

- PolyNote: fixed a bug where the per-step mute buttons were not working properly in legato mode.

- Rack : fixed a bug where after moving a stack, sequencers would not animate properly when running.

- Mixer: Fixed a bug where the on/off btn for a stack would not update properly on the mixer channel after loading a project.

- MIDI Filter : This module now has channel-based filter on input. If "MIDI Ch In" is set to "Omni", it will pass all messages. If it is set to a specific channel, then only MIDI input on that channel will be passed.

[amsonx]

A few fixes and updates. More on the way...

http://www.five12.com/Numerology-2.3.1b1.dmg

FYI: I have not yet tested the AC encoding support discussed below with a synth yet -- the algorithm is based on discussions w/ Os of ExpertSleepers and comparison with his AC Encoder plugin. If you have the correct cabling to test the AC output, I'll certainly be curious to know how it works.

t.

I've this configuration ,i use a little module not the cable but the schematics it's the same so I haved do some fast test :
all seems works well but in the weekend i'll go more in deep into this.

[cliffman]

I have need of the AC Encoder, so far the unit doesn't work for me at all.
Works fine in Logic, when I use the Numerology plugin with the built-in AC Encoder, it's not calibrating at all. If I load a saved cal file, doesn't track at all. Sometimes doesn't even change pitch.
I'm using a Tascam FW-1884 and the ES-1 module.

[jim]

I have need of the AC Encoder, so far the unit doesn't work for me at all.
Works fine in Logic, when I use the Numerology plugin with the built-in AC Encoder, it's not calibrating at all. If I load a saved cal file, doesn't track at all. Sometimes doesn't even change pitch.
I'm using a Tascam FW-1884 and the ES-1 module.

I'll check it on Thursday, I won't have access to my modular until then...

Jim

[baltimoroder]

I can't comment on the AC Encoder but I haven't seen any issues with the other Silent Way plugins in the 2.3 betas.

[cliffman]

Jim,
Have you been back to the modular yet? Be glad to test if you have any suggestions. I'm somewhat stuck.

cliffman

[jim]

Jim,
Have you been back to the modular yet? Be glad to test if you have any suggestions. I'm somewhat stuck.

cliffman

I'll be working on it a bit today, but my schedule is pretty nuts all week so I can't say exactly when I'll have something to test. Keep pinging me...

FYI: I'm building a "CV to Audio" module for N3 Pro -- it will also have an AC encoding option...

Jim